Red Magic 6 Pro {NX669J_11_NX669J} Unbrick File Tool By GSM Tested File




 

Red Magic 6 Pro {NX669J_11_NX669J} Unbrick File Tool By GSM Tested File









In this guide, we will show you the steps to unbrick the Nubia Red Magic 6/6 Pro/6R devices via Fastboot Commands. The Chinese OEM has done quite a decent job when it comes to its flagships segment. In this regard, its sixth iteration boasts of some impressive feature sets such as an astronomical 18GB RAM powered by the Snapdragon 888 chipset, which when coupled with Adreno 660 GPU translates to an absolute power packed device.


Moreover, all the three devices in this series are quite active in the custom development. Be it for flashing custom ROMs or installing a custom recovery like TWRP, there’s a lot to try out. Along the same lines, you could also gain administrative privileges by rooting your device via Magisk. This in turn will allow you to flash custom kernels and mods such as Magisk Modules and Xposed Framework.

However, carrying out these tweaks could prove to be risky, and if not done correctly, your device could end up in a bootloop or bricked state. Well, if that ever happens, then this guide shall come in handy. Given here are the detailed instructions steps that will help you to unbrick the Nubia Red Magic 6/6 Pro/6R devices via Fastboot Commands. Follow along.


STEP 5: Flash Firmware via Fastboot Commands & Unbrick Nubia Red Magic 6



Connect your device to the PC via USB cable. Make sure that it is booted to Fastboot Mode.

Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.


Now start copy-pasting the below commands in the CMD window. Make sure to execute one command at a time. Furthermore, if you get an error, just skip that command and move over to the next one, never leave the flashing process in between.


  1. fastboot flash abl abl.img
    fastboot flash aop aop.img
    fastboot flash bluetooth bluetooth.img
    fastboot flash boot boot.img
    fastboot flash cpucp cpucp.img
    fastboot flash devcfg devcfg.img
    fastboot flash dsp dsp.img
    fastboot flash dtbo dtbo.img
    fastboot flash featenabler featenabler.img
    fastboot flash hyp hyp.img
    fastboot flash imagefv imagefv.img
    fastboot flash keymaster keymaster.img
    fastboot flash modem modem.img
    fastboot flash multiimgoem multiimgoem.img
    fastboot flash odm odm.img
    fastboot flash product product.img
    fastboot flash qupfw qupfw.img
    fastboot flash qweslicstore qweslicstore.img
    fastboot flash shrm shrm.img
    fastboot flash system system.img
    fastboot flash system_ext system_ext.img
    fastboot flash tz tz.img
    fastboot flash uefisecapp uefisecapp.img
    fastboot flash vbmeta vbmeta.img
    fastboot flash vbmeta_system vbmeta_system.img
    fastboot flash vendor vendor.img
    fastboot flash vendor_boot vendor_boot.img
    fastboot flash xbl xbl.img
    fastboot flash xbl_config xbl_config.img

Finally, execute the below command to boot your device to the OS:

fastboot reboot

These were the steps to unbrick the Nubia Red Magic 6/6 Pro/6R devices via Fastboot commands. If you have any queries concerning the aforementioned steps, do let us know in the comments section. We will get back to you with a solution at the earliest.






Contact Form

Send